Fabric Mesh Pet Net Car Barrier--customized fit by Hatchbag
Our Price $55.50
Item #: FXHTBPETNET
Manufacturer: Hatch Bag
The PetNet(TM) is the only cloth mesh pet barrier product we've found. More humane for your pet (and no more scratching or rattling), and much simpler to install. The soft 1 inch mesh netting attaches with advanced dual lock fasteners. These fasteners make it easy to take the PetNet down when you aren't using it, and put it up when your pet is travelling with you. A PetNet makes the perfect addition to our Hatchbag, to create a safe and petproof environment in the back of your vehicle. Please note, that this is a mesh fabric barrier and does not work the way a metal barrier might work as a more permanent restraint. Also note that this item is not returnable if it has been taken out of the package and placed on your car.
Please note for proper fit: It is critical that the area be cleaned with the lacquer thinner beforeattaching the velcro. It should be wiped several times at eachlocation then let dry. If these are squares for the net, customershould mark with a pencil the center of area he has cleaned, assometimes you can't tell where your cleaned area is located. You maywant to refer back to this description when you receive your item sothat you don't have to purchase new velcro.
Small: Height 30", Width Top, 38.5", Width Middle 49.5" and Width Bottom 53"
Medium: Height 30", Width Top, 41.5", Width Middle 53.5" and Width Bottom 52"
Large: Height 30", Width Top, 44.25", Width Middle 53.5" and Width Bottom 55"
X-Large: Height 30", Width Top, 50.5", Width Middle 57" and Width Bottom 61"
Mini Vanl: Height 40", Width Top, 45", Width Middle 58" and Width Bottom 54"
When sizing your vehicle some space should be left between side of net and molding. Call 1-800-869-9091 if you need help with sizing.
The Pet Net is designed as a restraint for your pet, however, as with any restraint, a determined large animal may be able to circumvent the system.
Frequently Asked Questions About the Hatchbag
The mesh attaches to the side of the car interior at 3 locations with a 3M product called dual lock. It is a 1"Square adhesive piece that attaches to the molding at highest point without getting on the headliner. Another attaches approx 15" below the 1st and another approx. 15" below the middle.
It can be installed behind the front seat or the 2nd seat. It goes directly behind either of the seats. It does not have to be installed in a direct verticle line from top to bottom making it very versatile.
The top width is the most critical. Measurement should be taken from molding to molding (not glass to glass) or (headliner to headliner). Measure width at highest point without getting on the roofliner.
If your vehicle is not on our product list, most times we can recommend a size if we know the make and manufacturer of the car. You may want to add this to your checkout comments. The following is a helpful guide, but you should check the measurements of your car for an accurate fit. Please do not put this item on your car if you feel you may need to make a return. Any contact with your car makes this a used item.
X-5 (all yrs) Large.
Tour Wagon - Small
Accord/Civic Wagon -Small
Jetta Wagon -Large
Sorry, we dont have a liner that will fit the Pontiac Aztek.
Important Information for Attaching Parts
TIPS AND HINTSFOR LINERS AND NETS